The DALI ALTECO C-1 is truly a multipurpose speaker in both design and function. DALI wanted to ensure that the ALTECO C-1 is usable as both a height speaker as well as a traditional stereo speaker. By designing the crossover for stereo use and by keeping a strict focus on DALI sound design principles, we have created a speaker that fulfills both criteria. It is the perfect fit for adding height information to a surround setup or taking the role of an out-of-the-way stereo speaker.
The ALTECO C-1 delivers believable height information from Atmos, DTS-X, and Auro-3D movies in surround setup – not only when “firing up” using the ceiling as a reflector, but also “firing down” from a position up under the ceiling.
The ALTECO C-1 is able to achieve this even without special equalizing in order to enhance the effects from HRTF (Head Related Transfer Function) technology. A technology found in Atmos certified speakers. Instead, the ALTECO C-1 relies only on the height processing done in the amplifier when selected. Had we included non-linear HRTF equalizing in the ALTECO C1, it would have been impossible to use it as a versatile neutral speaker, limiting the use to only an up-firing type speaker.
Designed the way it is the DALI ALTECO C-1 offers the best from several worlds giving you ultimate flexibility and multiple applications.
Build around a 4½” low loss wood fibre woofer and a 21mm ultra-light soft dome tweeter, the ALTECO C-1 brings all of the DALI sound principles to your living room in a unique new design.
The wood fibre cones are a DALI trademark, as well as a proven DALI technology. The ALTECO C-1 cone membrane is crafted from a mix of fine-grained paper and wood fibre pulp. This makes the cones very ridged, very lightweight and the unevenness in the structure of the membrane helps minimize unwanted surface resonances.
Combining the well-behaving wood fibre cone with the low-loss rubber surround and spider suspension results in the reproduction of even the smallest micro-detail in the signal – unfiltered and with high accuracy.
The angled front and the dual sound modes enable the ALTECO C-1 to be used in a multitude of speaker positions.
Add height information in any surround setup by either placing the ALTECO C-1 on top of the front or the rear speakers. It can also take the place of traditional front speakers placed high on the wall or horizontal on the sidewall. It even offers the perfect angle for close listening in a desktop setting.
Using the switch placed on the front of the speaker to select the down-firing sound mode, the ALTECO C-1 can be used as a rear or surround speaker placed on the wall close to the listening position. This is possible because the down-firing sound mode lowers the direction of the sound downwards by 25 degrees.
The DALI ALTECO C-1 is a true master of diversity. Giving you the flexibility to effortlessly add height information to your current or new surround system, getting the perfect angle on your rear or surround speakers, or getting music in rooms where the speakers need to be out of the way.
The primary function of any loudspeaker is to convert the electrical signal from the amplifier into a realistic audio experience in the listening room. Any distortion or coloration of the original signal by drivers or enclosures is by definition a degradation of the sound.
DALI ALTECO C-1 SPECS
|Frequency Range (+/-3 dB) [Hz]
|74 – 25,000 Hz
|Sensitivity (2,83 V/1 m) [dB]
|Nominal Impedance [ohms]
|Maximum SPL [dB]
|Recommended Amplifier Power [W]
|40 – 100 Watt
|Crossover Frequency [Hz]
|High frequency driver, Quantity
|1 x 21 mm
|High frequency driver, Diaphragm type
|Soft Textile Dome
|Low frequency driver, Quantity
|1 x 4.5″
|Low frequency driver, Diaphragm type
|Wood Fibre Cone
|Single Wire (Spring loaded push button)
|Recommended Distance From Wall [cm]
|1 – 100 cm
|Dimensions (HxWxD) [mm]
|265 x 160 x 200